ECU TOOL EDC15  ME7 For VAG ECU Programmer

Top 5 Reasons To Get C=VAG ECU TOOL:

1. Read and write access to the EEprom.
2. Reading the secret odometer (if stored in the engine control unit)
3. Immo-off function, login display, VIN change - everything about the diagnosis socket-not removing the ECU.
4. With the write function is motor control "cloning" - no need to teach.
5. Indispensable for workshops, recovery or Chiptuning.

 Functions:

serial EEprom read and save 
EEprom checksum checking and correction 
IMMO on / off 
EEprom from a file and write (clone function) 
Read / write access to the login 
Read / write access to the chassis number 
Read / write access to the Immobilizernummer
Kilometers Motronic in the read and write (if available)    
 
In the ME7 . Controllers can also perform the following functions:   

Offset channels 
Mixture enrichment 
Idling torque change 
Lambda value 
Idle speed change 
Correct charge (only for Turbo engines) 
Ignition timing change     

Supports the following types of Motor Control of BOSCH:

EDC15 
EDC15VM 
EDC15P 
EDC15P +   BOSCH ME7.5 
BOSCH ME7.5.1 
BOSCH ME7.1 
BOSCH ME7.1.1   

Packing List:

1 x VECU TOOL EDC15  ME7 For VAG ECU Programmer