Cheap Ad-BlueOBD2 Emulator For BENZ Trucks Ad-Blue/DEF And NOx Emulator
Description
Cheap Ad-BlueOBD2 Emulator for BENZ Trucks
Ad-BlueOBD2 for BENZ Trucks Description:
ad-BlueOBD2 is a Plug&Drive Ready device to mulate working ad-Blue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged ad-Blue SCR system.
Ad-Blue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use ad-Blue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your ad-Blue/DEF tank.
Top 5 Reasons to Get Ad-blueOBD2 Emulator for Benz Trucks:
1. ad-BlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. ad-BlueOBD2 will override AD-Blue system instantly, it will stop the usage of ad-Blue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. ad-BlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. ad-BlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug ad-BlueOBD2 from OBD2 connector.
Installation and Calibration for BENZ Trucks:
1.Pull the Key out from the ignition
2.Remove the following Fuses (MERCEDES BENZ)
F1
3.Plug Ad-blueOBD2 into OBD2 connector
4.Turn on the ignition and check the level of ad-Blue, if it shows 50% or 70%
5.If any fault light appears on dashboard, delete via service scanner
Package including:
1pc x Ad-BlueOBD2 Emulator Box Interface
Tags:
Products Recommeded by Tui21
Vag COM , TCS CDP , VAS5054A , GM Tech2 , Iprog+ Programmer , Orange 5 programmer , SBB3 PRO3 Key Programmer , wiTech MicroPod II , T300+ Key Programmer, Iprog, Scania VCI3, mercedes star diagnostic, Porsche Piwis, vocom 88890300, Renault CAN Clip, SBB Pro2 Key Programmer, NEXIQ USB Link